Product introduction
Polyethersulfone (PES) microporous membranes are naturally hydrophilic and are made of acid and alkali resistant high temperature polyethersulfone polymers. Therefore, it has high water flux, extremely low protein adsorption capacity, pH2-12, particle retention rate greater than 99.99%, good high temperature resistance and acid and alkali resistance, in line with FDA biosafety standards, widely used in food, medicine, etc. Fields, such as filtration and clarification of conventional filtration, sterile filtration, intravenous injection, biopharmaceuticals, bacterial separation, etc.
Craftsmanship
dry / wet / mixed method
Product Features
1. Hydrophilic: No need for wetting agents that may interfere with the analysis.
2. Low Extractables: Ensure that test results are not affected by wetting agents or other extractables.
3. Low drug and protein binding: maximize the recovery of key drugs or proteins.
4. Has strong anti-stretching ability.
5. High flow rate: PES membrane has high flow rate due to its symmetrical pore structure. This makes them ideal for filtration applications where fast filtration is required.
6.Chemical Resistance: PES membranes are highly resistant to a wide range of chemicals, including organic solvents and acids. This makes them suitable for filtration applications involving aggressive chemicals.
7.High Purity: PES membranes are manufactured using a controlled process to ensure high purity and low extractables. This makes them suitable for critical applications where purity is critical.
8.High temperature resistance: PES film can withstand high temperature up to 130°C without degradation. This makes them suitable for filtration applications that require high temperature sterilization.
Product Specifications
| Name | PES hydrophilic membrane | PES hydrophilic membrane | PES hydrophilic membrane |
| Support layer | None | None | None |
| hole junction | asymmetrical | asymmetrical | asymmetrical |
| hole size | 0.1μm | 0.22μm | 0.45μm |
| Bacteria retention rate | -- | >7 log reduction value (Brevundimonas diminuta) | >7 log reduction value (Serratia marcescens) |
| Bubble point | 0.60-0.75Mpa | 0.40-0.57 Mpa | 0.24-0.37Mpa |
| Water flow (10psi) | 10-13 ml/min/cm2 | 20-40 ml/min/cm2 | 40-52 ml/min/cm2 |
| Thickness | 100-110μm | 100-110μm | 100-110μm |
| Width | 0.22-0.45μm: 254mm 0.05-1.2μm, 5μm: 50-200mm |
| Length | 0.22-0.45μm: 100-150m 0.05-1.2μm, 5μm: 50-200m |
Surface low magnification SEM
|
 |  |
One side (large aperture) SEM |
The other side (small aperture) SEM |
 |  |
Order specifications
| Model | Hole（μm） | Width（mm） | Length（m） |
| hspes022 | 0.22μm | 254mm | 100m 150 m |
| hspes045 | 0.45μm | 254mm |
| hspes005 | 0.05μm | 254mm | 50m 100m 150m 200 m |
| hspes010 | 0.1μm | 254mm |
| hspes065 | 0.65μm | 254mm |
| hspes080 | 0.8μm | 254mm |
| hspes100 | 1.0μm | 254mm |
| hspes120 | 1.2μm | 254mm |
| hspes500 | 5.0μm | 254mm |
Selection reference
| Application Direction | Select Specifications |
| For clarification and removal of some visible particles | 3-5μm |
Large molecular organic matter/particle removal, such as yeast and mold removal | 0.6μm |
Categories used for bacterial reduction, targeted removal, such as some heat source control, etc. | 0.45μm |
In terms of bacterial retention, such as for the removal of bacteria | 0.22μm |
Remove small molecule organic matter, used for bacteria removal | 0.1μm |
Application
1. Used for sterilization of biological liquids
2. Water treatment membrane filtration
3. Sterilization of drugs in the medical industry
4. Protein and enzyme filtration
5. General filtering
6. Sterile filtration
7. Intravenous injection
8. Biopharmaceuticals
9. Bacterial isolation
Product data download
